PID Sensor for VOC Detection | Photoionization Sensor for VOC & TVOC Monitoring

classify:PID sensor   time:2026-11-04

What is PID sensor for VOC detection

PID stands for Photoionization Detector. A PID sensor is a widely used sensing component to detect VOCs (Volatile Organic Compounds). It serves as the core sensor inside most TVOC meters and organic vapor detectors for field screening.

How PID sensor detects VOC

The built-in UV lamp emits high-energy photons (10.6 eV is standard). When VOC molecules flow into the ionization chamber and their ionization potential is lower than photon energy, the VOC molecules get ionized into ions and electrons.The collecting electrodes capture charged particles and produce a tiny electric current. The current is proportional to VOC concentration and converted into ppm or ppb readings.This is non-destructive detection; gas molecules recover after measurement.

Detectable VOCs

Benzene, toluene, xylene, ethanol, isopropanol, acetone, ethyl acetate, styrene and most common solvent vapors, aromatic hydrocarbons and aldehydes.Note: PID gives a total VOC response. It cannot identify individual VOC species from a gas mixture automatically.

Benefits of PID sensor for VOC detection

  1. Fast response, ideal for vapor leak survey;
  2. High sensitivity, down to ppb level;
  3. Available as compact sensor modules, easy integration into detectors and online monitors;
  4. Suitable for on-site spot checks and emergency response.

Typical Applications

Indoor air quality testing, VOC leak inspection in chemical plants, coating exhaust monitoring, site investigation of soil & groundwater contamination, printing & adhesive workshop monitoring, hazardous material response.

Limitations

  1. No built-in gas selectivity for mixed VOCs;
  2. Readings can be interfered by high humidity and certain gases;
  3. UV lamp is a consumable part with limited lifespan;
  4. Gases with higher ionization potential (methane, CO₂, etc.) cannot be detected.